Fitting the LowStir sensor head to your milling machine is normally done with a standard ISO taper which we can supply ready connected to the head if you specify the size required (for example, ISO 50).

The LowStir unit is capable of measuring:

• Down force (Fz) to 50 kN
• Lateral force (Fxy) to 25 kN
• Torque (Mz) to 100 Nm
• Temperature of the internal electronics (to warn of overheating)
• Optionally, the temperature of any moving part.

The unit will run at rotation speeds of up to 3000 rpm.

The data log rate is software selectable from 1 to 100 Hz.